CONSTRAINING NUMERICAL VALUES FOR A REFERENCED CRICKET BAT HANDLE ON SELECTED GEOMETRICAL PARAMETERS

Authors

  • Ashish Kumar Katiyar Research Scholar, Department of Physical Education, A.M.U., Aligarh (U.P.) India
  • Syed Tariq Murtaza Associate Professor, Department of Physical Education, A.M.U., Aligarh (U.P.) India
  • Shamshad Ali Associate Professor, Mechanical Engg. Section, University Polytechnic, A.M.U., Aligarh (U.P.) India

DOI:

https://doi.org/10.46827/ejpe.v0i0.1629

Keywords:

Cricket bat, Cricket bat handle, selected geometrical parameters

Abstract

A survey was carried out on Grade ‘A’ cricket bats handles, made up of the finest quality of four pieces Singapore cane with 3 rubber springs. Standard cricket bats handles were chosen from four different cricket manufacturing agencies, due to having different geometrical parameters. All handle were meticulously taken off from the blade and then they were measured and recorded, aiming to constraining a new measurement for a referenced cricket bat handle of short length. The estimation was made on the behalf of the measurement (value) taken from different size of handle ranging from their minimum to maximum, and standard values of handle keeping in view on their distinct parameters separately. So, by this way determination of geometric parameters and new modification were made for constraining measurement for a referenced cricket bat handle (i.e. short in length and round in shape) found for our purpose.

 

Article visualizations:

Hit counter

DOI

References

Ali, S., & Murtaza, S. T. (2014). 993/DEL/2014 A. India: The Patent Office Journal, India. Retrieved from http://www.ipindia.nic.in/writereaddata/Portal/IPOJournal/1_142_1/official-journal-20-06-2014-part1.pdf

Ali, S., Murtaza, S. T., & Katiyar, A. K. (2016). Innovative Cricket Bat-A Way to Reduce player’s Burdon. International Journal of Engineering & Scientific Research, 4(1), 189–196.

Allen, T., Fauteux-Brault, O., James, D., & Curtis, D. (2014). Finite Element Model of a Cricket Ball Impacting a Bat. Procedia Engineering, 72, 521–526. https://doi.org/10.1016/j.proeng.2014.06.090

Grant, C. (1998). The role of materials in the design of an improved cricket bat. MRS Bulletin, 23(3), 50–53. https://doi.org/10.1557/S0883769400029997

John, S., & Li, Z. B. (2002). Multi-directional vibration analysis of cricket bats. The engineering of sport, 4, 96-103.

Katiyar, A. K., Murtaza, S. T., & Ali, S. (2016). Critical Analysis on the Design and Use of Materials in Cricket Bat Handles. International Journal of Research in Economics and Social Sciences (IJRESS), 6225(10), 223–228. Retrieved from http://euroasiapub.org/current.php?title=IJRESS

Katiyar, A. K., Murtaza, S. T., & Ali, S. (2018). Determining Geometrical Parameters for a Referenced Cricket Bat Handle. European Journal of Physical Education and Sport Science, 4(3), 158–164. https://doi.org/10.5281/zenodo.1218138

Laver, J. (2002). Laver & Wood Cricket Bats: The CARBO - 2008 Carbocane Handle Technology. Retrieved 20 February 2018, from http://www.laverwood.co.nz/carboproduct_detail.php

MCC. (2017). © Marylebone Cricket Club Laws of Cricket 2017 Code, (April), 1–82.

Downloads

Published

2018-05-10

Issue

Vol 4, No 5 (2018)

Section

Articles

License

Authors who publish with this journal agree to the following terms:

 

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

 

  1. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

 

  1. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).