EFFECTIVENESS OF COMPUTER TUTORIAL MODEL, DRILL AND PRACTICE ON STUDENTS’ ACHIEVEMENT AND RETENTION IN FABRICATION AND WELDING TECHNOLOGY IN TECHNICAL COLLEGES
DOI:
https://doi.org/10.46827/ejes.v7i10.3304Keywords:
computer tutoring model, drill and practice, achievement, retention, fabrication and welding technology. and technical collegesAbstract
The study determined the effectiveness of computer tutorial model, drill and practice on students’ achievement and retention of students of fabrication and welding technology in technical colleges in Delta State. Two research questions were answered, and two null hypotheses were tested at 0.05 level of significance. Quasi-experimental design was used for the study. Population of the study was 136 National Technical Certificate (NTC) year 2 fabrication and welding students in state owned technical colleges. Purposive sampling technique was used to draw four schools out of the six technical colleges with 101 students for the study. Instruments for data collection were Fabrication and Welding Achievement Test (FWAT). The instrument was face and content validated by three experts. Test–retest method was used to establish its reliability of FWAT and was calculated using Pearson product moment correlation which yielded a correlation coefficient value of 0.87. Treatment procedure of computer tutorial model, drill and practice instructional strategy and Lecture-demonstration teaching method for the study was carried out. Arithmetic mean and standard deviation were used to answer the research questions while Analysis of Covariance (ANCOVA) was used to test the null hypotheses. The students in the experimental group obtained higher mean scores than in the control group in cognitive achievement as well as in cognitive and psychomotor retention. There was a significant difference between the mean scores of experimental group and control group in the cognitive achievement and psychomotor retention of students in fabrication and welding in technical college. In view of the positive effects of computer tutorial, drill and practice it was recommended among others, that the method should be adopted to teaching fabrication and welding technology in order to enhance students’ cognitive achievement and psychomotor retention. Also, the school administration should provide opportunities for in-service training and provide computers for fabrication and welding technology teachers and students to enable them acquire competencies needed in the use of modern technology instructional approach for teaching and learning fabrication and welding in technical colleges.
Article visualizations:
References
Adedoja, G. O., & Fakokunde, J. B. (2015). Effect of computer-based instructional puzzle on students’ learning outcomes and retention in social studies. International Journal of Humanities and Social Science, 5(11), 181-187.
Adedeji, O. A. & Mudasiru, O. Y. (2010). Effect of computer assisted instruction (CAI) on secondary school students’ performance in biology. The Turkish Online Journal of Educational Technology 9(1).
Ercan, O., Bilen, K., & Bulut, A. (2014). The effect of web-based instruction with educational animation content at sensory organs subject on students' academic achievement and attitudes. Retrieved December5, 2017, from https://www.researchgate.net/publication/270847218
Eze, T. I. Ezenwafor, J. I & Molokwu, L. I. (2015). Effect of meta-learning teaching method on the academic performance of building trade students in technical colleges in south-east Nigeria. International Journal of Vocational and Technical Education 7 (10). 101-180.
Eze, T. I. Ezenwafor J. I. & Obidile I. J. (2016) Effect of problem – based teaching method on students’ academic performance and retention in financial accounting in technical colleges in Anambra state scholar Journal of Arts, Humanities and Social Sciences, 4(6A), 634-639.
Eze T. I. & Osuyi, S. O. (2018). Effect of problem–based teaching method on students’ academic performance in electrical installation and maintenance works in technical colleges in Edo State. International Journal of Development Sustainability, 7, 666-67.
Federal Republic of Nigeria (2013). National policy on education (6th ed), Lagos: NERDC Press.
Cotton, K. (2001). Computer-assisted instruction. Retrieved July 20, 2007 from http://www.nwrel.org/scpd/sirs/Computer-AssistedInstruction.htm
Kilishi, A. A., Mobolaji1, H. I., Usman, A., Yakubu, A. T., & Yaru, M. A. (2014). The effect of unemployment on crime in Nigeria: A panel data analysis. British Journal of Economics, Management & Trade, 4(6), 880-895, retrieved July 2, 2018, from http://www.journalrepository.org/media/journals/BJEMT_20/2014/Feb/Kilishi462013BJEMT5991 _1.pdf
Lesteri, A. S. (2015). Application of computer-based learning model tutorial as medium of learning. American Journal of Educational Research, 3(6), 702-706. Retrieved June 25, 2018 from http://pubs.sciepub.com/education/3/6/6
Mudasiru, O. Y. & Adedeji, O. A. (2010). Effects of Computer Assisted Instruction (CAI) on Secondary School Students’ Performance in Biology. The Turkish online journal of Educational Technology 9 (1) 62 – 69
Mba, F. I. (2012). Learning and teaching methodology. Journal of Educational and Social National Board for Technical Education (2003). National Technical Certificate and Advanced National Technical certificate curriculum and Modules specifications for Motor Vehicle Mechanics Work. National Board for Technical Education Kaduna. Revised Curricular for Technical colleges and polytechnics (CD).
Mohd Fairuz, B. Z. (2005). Expert system for car maintenance and troubleshooting. Retrieved on May 5, 2008 from http://www.Generation5.org/content/2005/car Maintenance.asp.
Moursund, D. (2006). Brief introduction to educational implications of artificial intelligence. Retrieved on September 29, 2007 from http://www.darkwing.uoregon.edu/~Moursund/dave/index.html.
NABTEB (2012). NABTEB Chief Examiner’s report on the 2012 November/December NBC/NTC examinations. Benin: NABTEB
National Board for Technical Education (2001). National Technical Certificate and Advanced National Technical certificate curriculum and Modules specifications for Motor Vehicle Mechanics Work. NBTE Research, 2(4), 8-16.
NABTEB (2014). May/June 2002 National Technical Certificate (NTC) and National Business Certificate (NBC) Examinations: Chief Examiner’s Report. National Business and Technical Examinations Board (NABTEB), Fiesta Printing Press Ltd., Benin City, Edo State, Nigeria
Odundo, P. A. & Gunga, S. O. (2013). Effects of application of instructional methods on learner achievement in business studies in secondary schools in Kenya. International Journal of Education and Research, 1 (5), 1-22.
Olori, A. L., & Igbosanu, A. O. (2016). Effect of computer-based multimedia presentation on senior secondary students’ achievement in agricultural science. Journal of Education and Practice. 7(31), 31-38, Retrieved, July 5, 2018, from https://files.eric.ed.gov/fulltext/EJ1122547.pdf
Oranu, R. N. (2003). Vocational and technical education in Nigeria. Retrieved on July 18, 2005 from http://www.ibe.co.org/curriculum/Africapdf/lago2ora.pdf
Ogundola, P. I. Popoola, A. A. & Oke, J. O. (2010). Effect of constructivism instructional approach on teaching practical skills to mechanical related trade students in western Nigeria technical colleges. International NGO Journal 5(3), 59-64. Retrieved June 15, 2018 from https://academicjournals.org/journal/INGOJ/article-full-text-pdf/FD9CFF840498
Ogwo, B. A. Nwoke & Oranu, R. N. (2006). Methodology in formal and non-formal technical vocational education. Nsukka: University of Nigeria Press.
Okoro, O. M. (1999). Principle and methods in vocational and technical education. Nsukka. University Trust Publishers.
Onwusa, S. C. (2015). Assessment of auto-mechanics teachers’ utilization of instructional materials in teaching in technical colleges in Edo and Delta States. Unpublished Master’s Thesis. Vocational Education Department, Nnamdi Azikiwe University, Awka.
Okundaye, B. O. (2005). Educator Courseware for Statistics and Basic. An unpublished PGDCS Thesis. University of Benin/
Owoso, J. O. (2012). Effects of collaborative learning and framing on psychomotor achievement and interest of auto mechanics students in the technical colleges in Lagos State, Nigeria. Proceeding of Proceedings of Institute of Science, Technology and Education (ISTE) International Conference on Mathematics, Science and Technology, University of South Africa, 427-443
Prensky, M. (2001). Digital natives, digital immigrants part 1. On The Horizon, 9(5), 3 – 6. http://dx.doi.org/10.1108/10748120110424816
Tella, A. (2007). The impact of motivation on students’ achievement and learning outcomes in mathematics in Nigeria. Eurasia Journal of Mathematics, Science and Technology Education 3(2), 149 – 156.
Safo, A. D. Ezenwa, V. I. & Wushishi, D. I. (2013). Effect of computer assisted instructional package on junior secondary school student’s achievement and retention in geometry in Minna Niger State, Nigeria. International Journal of Humanities and Social Science Invention, 2(5), 69-74. Retrieved from http://www.ijhssi.org/papers/v2(5)/version-5/J256974.pdf
Unwunadi, E. K. (2006). Effect of teacher constructed circuits on students’ performance in basic electronics and Electronics. Unpublished Ph. D Thesis. Department of Vocational Teacher Education, University of Nigeria, Nsukka.
Downloads
Published
Issue
Section
License
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
